Gooseneck Keypad/Intercom Stands
Three (3) different plate sizes available for different devices. The GateCrafters.com keypad stand is made from 6060-T6 wrought aluminum to last you years to come. The 9" of clearance from the face of the stand to the face of the plate allows plenty of room for cars to pull up and not scratch their finish on the post.
|
$59.95
 |
|
|
|
|
|
Gate Crafters Z-Lock (ZL2-KSA)
This revolutionary latch is made of a super strong polymer and stainless steel. Meets Federal ADA standards. Easy installations requires no special tools or jigs
|
$70.68
|
|
Gate Crafters, Deluxe Lock Latch
The Lokk-Latch® Deluxe is a high quality security and privacy gate latch for general-purpose gates. Special, longer side-fixing legs on this model provide extra strength and easy fitting alignment
|
$60.99
|
|
Tri Custom Manufacturing 12 in. x 12 in. x 17 3/8 in. Pillar Riser
The TCM Pre-formed Pillar Riser stands 12 in. x 12 in. x 17 3/8 in. It is intended to be used with the 12 in. x 12 in. x 59 in. Stackable Pillar and is perfect for fence heights that exceed average height and can accommodate a maximum fence height of 6 feet.
|
$61.20
|
|
|
|
|
|
Universal Ball Bearing Hinge Kit (BH MADJ)
Universal Ball Bearing Hinge Kit. Kit includes one pair of hinges.
Hinge Barrel Dimensions: H 2 3/8", W 1", D 1 1/4"
J Bolt Dimensions: 4 1/2" Threading, 5/8" Diameter
|
$16.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital Multimeter (DT-830D)
Digital Multi-meter pocket sized w/ audible continuity, AC voltage, DC current, and resistance capability.
|
$22.95
|
|
Digital Caliper
Say goodbye to inaccuracy. Place an object to be measured between the caliper's jaws and the digital reading will give you an accurate measurement.
|
$24.99
|
|
|
Gate CraftersLock Bolt Drop Rod for Vinyl (LB124BXWT-KSA)
This gem of a drop rod will fix that problem. Featuring a rugged stainless steel and reinforced fiberglass construction this latch is not only functional and looks good, but can also be keyed alike to most house doors. Kwik-set key way
|
$58.95
|
|
|
|
9" in Height 3x3 Angle Iron (AI)
The Angle Iron can be bolted or welded to the outside edge of any flat post to extend the width of the post for mounting purposes.
|
$12.00
|
|
|
Apollo Bolt Mounting Kit (446)
This bolt mounting kit allows the Apollo 1550 or 1650 to be bolted on instead of the standard weld installation.
|
$40.00
|
|
|
|
Miller Edge Gate Bumper- 5 ft (GB0101-5)
The extrusion is designed to provide a flexible cushion to the leading or trailing edge of a 2" gate frame. It easily attaches to the gate by inserting screws through the mounting flange and into the gate frame. (Screws are not included)
|
$39.95
|
|
Miller Edge Gate Bumper- 6 ft (GB0101-6)
The extrusion is designed to provide a flexible cushion to the leading or trailing edge of a 2" gate frame. It easily attaches to the gate by inserting screws through the mounting flange and into the gate frame. (Screws are not included)
|
$45.95
|
|
Miller Sensing Edge 5 feet (MGS20B2U5)
The sensing edge offers 3-sided activation for an added measure of protection. When touched, these electrically activated edge sensors immediateley signal the gate operator to stop and reverse.
|
$199.00
|
|
|
|
|
|